25 March 2021

The Kashiikaen Sylvania Garden will be going to close down

本日、かしいかえんの年末での閉鎖が発表された。

入園したことはないが、以前にそばを通ったときの写真。 

Today closing down of the Kashiikaen is announced.

Photos of when I passed there, although I didn't enter the park.


24 August 2020

SONY Walkman NW-A919 with Windows 10

音楽や動画再生以外にワンセグテレビも見ることができるWalkman NW-A919。

Walkman NW-A919 can play musics and videos, moreover watch 1-seg television.

1-seg television on NW-A919


Windows 10環境で音楽を転送するためには専用のソフトウェアが必要になるが、すでに入手することはできない。ただ、Internet Archiveからダウンロードができる。

A dedicated software is required to transfer musics in Windows 10, but it's not available on SONY website. However it can be downloaded from the Internet Archive.

https://web.archive.org/web/20171226021413/https://www.sony.jp/support/audiosoftware/x-appli/download/

Installing the x-appli


インストールが終わるとウォークマンの中の楽曲が見えた。

I can see music in the device after installing the software.


23 July 2020

Making of the kerchunk server kit KS-01 (7)

前回の記事の続きで、いよいよ完成。
Finally it's completed. The previous article is here.

FT-818NDの上にあるのがカーチャンク・サーバーKS-01。
Above the FT-818ND is the Kerchunk Server KS-01.
KS-01 and FT-818ND

前面から見た内部。
Inside view from front.
Inside view from front

背面から見た内部。
Inside view from rear.
Inside view from rear

動作映像。
The video is as the follows.

19 July 2020

Making of the kerchunk server kit KS-01 (6)

前回の記事の続き。
The previous article is here.

ボタンや筐体に文字を入れるためにインレタを探した。サンハヤトからはもう発売されていないようだ。写真はおそらく20年以上前に購入したもの。
I searched instant lettering to put text on buttons and case. Now it doesn't seemed to be sold by Sunhayato. The following photo is own instant lettering which purchased over 20 years ago.
Instant lettering

状態表示のLEDやボタンに文字を入れた。
I added text to LEDs and buttons.
Labeling

梅雨で塗装の機会がなかなかなかったが、ひとまずサーフェイサーを吹いた。塗装はつや消しの黒にしたいので塗料を買ってこないと。
I had not had a chance to paint case because of the rainy season. Today I sprayed a surfacer on it. I wanna color the case matte black, so it needs to buy a paint.
Surfacer

10 July 2020

Making of the kerchunk server kit KS-01 (5)

前回の記事の続き。
The previous article is here.

操作ボタンや液晶を載せたサブ基板が完成したので動作確認。問題なく動作。
I checked functions of the kit after sub PCBs that have operational buttons and LCD was finished to make. The result was OK.
Test

光り物の明るさも問題ない。
The brightness of lamps and back light is also OK.
Brightness

初期設定をすませてカーチャンクを少し楽しむ。後はケースの塗装や文字入れを行って完成の予定。
I'm enjoying this kit a little after completed initial configuration. Remained tasks are painting case, and labeling.
Temporary installation