Making of the kerchunk server kit KS-01 (3)

前回の記事の続き。
The previous article is here.

外付けにするスイッチやLEDを除いて半田付けが完了。かかった時間は2時間弱。抵抗やコンデンサーの数は程よい量。
Soldering is complete except for switches and LED. It took about 2 hours. The volume of resistors and capacities is not too much, not to little. So I felt fulfilled without fatigue after soldering them.

PCB

IC(aPR33A3)の下にあるコンデンサー2つはコンデンサーが太いこと、近接する抵抗の影響で少し浮いた感じに。
The two capacities near the IC(aPR33A3) are a little floating due to there are thick and a register is close to them.

Floating capacity

黒い基板は半田した面の確認が少しやりづらいが全体としては組みやすいキット。
It's a little difficult to check the solder because the PCB color is black. But the kit is easy to assemble as a whole.

Backside of the PCB